Product Safety Information

All electronic components of the Core are from supplied from third-parties and only the casing is creating in-house by 3D printing. For the latest safety instructions referencing to the Core processing board, please refer too:

Product Specification

Processor: Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4GHz
Connectivity: 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE Gigabit Ethernet over USB 2.0
SD card support: Micro SD format for loading operating system and data storage
Input Power: 5V/2.5A DC via micro USB connector 5V DC via GPIO header Power over Ethernet (PoE)–enabled (requires separate PoE Adapter)
Environment: Operating temperature, 0–50°C


The Core should only be connected to an external power supply rated at 5V/2.5 A DC. Any external power supply used with the Core shall comply with relevant regulations and standards applicable in the country of intended use.
The Core should be operated in a well-ventilated environment and The Core’s ventilation should not be covered or blocked for any reason.
Whilst in use, the Core should be placed on a stable, flat, non-conductive surface and should not be contacted by conductive items.
The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.


To avoid malfunction of or damage to this product, please observe the following:

Do not expose the Core to water or moisture, or place on a conductive surface whilst in operation.
Do not expose to heat from any source; the Core is designed for reliable operation at normal ambient temperatures.
The Core is not designed to be powered from a USB port on other connection equipment if this is attempted it may malfunction.

Disclaimer - Home Automate is not liable for any repercussions incurred that's resultant from the Core being hacked or tampered with in any format as the Pi frequency can be amended and the legal regulations in accordance are applicable to the owner.